Honda NC700 2012 User Manual

23-12
dummyheaddummyhead
IMMOBILIZER SYSTEM (HISS)
GROUND LINE INSPECTION
Check for continuity between the ECM/PCM 33P
connector [1] terminals and ground.
There should be continuity at all times.
CKP SENSOR LINE INSPECTION
Disconnect the CKP sensor 2P (Red) connector [1]
(page 23-6).
Check for continuity between the ECM/PCM 33P
connector [2] and CKP sensor 2P (Red) connector
terminals.
There should be continuity between the same color wire
terminals.
IMMOBILIZER RECEIVER
INSPECTION
Remove the shroud/side cover (NC700X/XA/XD) (page
2-14).
Remove the headlight/headlight stay (NC700S/SA/SD)
(page 2-27).
Disconnect the immobilizer receiver 4P (Black)
connector [1].
CONNECTION: Green/orange – Ground
Green – Ground
TOOL:
Test probe 07ZAJ-RDJA110
[1]
G/O G
CONNECTION: Yellow – Yellow
Green/orange – Green/orange
TOOL:
Test probe 07ZAJ-RDJA110
[1]
[2]
G/O
Y
G/O
Y
NC700X/XA: NC700S/SA/SD:
[1][1]
NC700XD:
[1]

Honda NC700 2012 Specifications

General

Brand	Honda
Model	NC700 2012
Category	Motorcycle
Language	English