10-8
dummyheaddummyhead
CYLINDER HEAD/VALVES
ROCKER ARM
REMOVAL
Remove the cylinder head cover (page 10-5).
Remove the camshaft maintenance cap [1] and O-ring
[2].
Remove the crankshaft hole cap (page 3-10).
Turn the crankshaft counterclockwise and align the " "
mark [1] on the cam sprocket with the lower cylinder
head index line [2].
Remove the rocker arm shaft bolts [1].
Remove the rocker arm assembly [1].
Be careful not to let the dowel pin [2] fall into the
crankcase.
Remove the dowel pin from the rocker arm shaft.
To Next Page
Loading...
Need help?
General
