19-6
dummyheaddummyhead
HYDRAULIC BRAKE
TORQUE VALUES
ITEM Q'TY
THREAD TORQUE
REMARKS
DIA. (mm) N·m (kgf·m, lbf·ft)
Brake caliper bleed valve
(NC700X/S)
2 8 5.4 (0.6, 4.0)
Brake caliper bleed valve
(NC700XA/XD/SA/SD)
3 8 5.4 (0.6, 4.0)
Master cylinder reservoir cover
screw
4 4 1.5 (0.2, 1.1)
Rear brake reservoir mounting bolt 1 6 10 (1.0, 7)
Brake pad pin 2 10 17 (1.7, 13)
Rear brake caliper mounting bolt 1 8 22 (2.2, 16) ALOC bolt; replace with a new one.
Front master cylinder holder bolt 2 6 12 (1.2, 9)
Brake hose oil bolt
(NC700X/S)
4 10 34 (3.5, 25)
Brake hose oil bolt
(NC700XA/XD/SA/SD)
5 10 34 (3.5, 25)
Front brake light switch screw 1 4 1.2 (0.1, 0.9)
Front brake lever pivot bolt 1 6 1.0 (0.1, 0.7) Apply 0.10 g (0.004 oz) silicone
grease to the sliding surface.
Front brake lever pivot nut 1 6 5.9 (0.6, 4.4)
Rear master cylinder mounting
bolt
2 6 12 (1.2, 9)
Step holder mounting socket bolt 4 8 32 (3.3, 24)
Rear master cylinder hose joint
screw
1 4 1.5 (0.2, 1.1) Apply locking agent to the threads.
Rear master cylinder push rod lock
nut
1 8 17 (1.7, 13)
Front brake caliper pin 1 8 22 (2.2, 16) Apply locking agent to the threads.
Apply 0.4 g (0.01 oz) silicone grease
to the sliding surface.
Front brake caliper bracket pin 1 8 12 (1.2, 9) Apply locking agent to the threads.
Apply 0.4 g (0.01 oz) silicone grease
to the sliding surface.
Front brake caliper mounting bolt 2 8 30 (3.1, 22) ALOC bolt; replace with a new one.
Rear brake caliper pin 1 12 27 (2.8, 20) Apply 0.4 g (0.01 oz) silicone grease
to the sliding surface.
Parking brake caliper mounting
bolt (NC700XD/SD)
2 8 31 (3.2, 23) ALOC bolt; replace with a new one.
Parking brake caliper pin bolt
(NC700XD/SD)
1 8 22 (2.2, 16) Apply locking agent to the threads.
Parking brake pad pin
(NC700XD/SD)
2 8 17 (1.7, 13) ALOC bolt; replace with a new one.
Parking brake adjuster bolt lock
nut (NC700XD/SD)
1 8 17 (1.7, 13)
Parking brake cable mounting nut
(NC700XD/SD)
1 10 10 (1.0, 7)
To Next Page
Loading...
Need help?
General
