Honda NC700 2012 User Manual

12-19
dummyheaddummyhead
DUAL CLUTCH TRANSMISSION (DCT) (NC700XD/SD)
64-1 (64)
No.2 clutch oil pressure high
• No.2 clutch EOP sensor malfunction
• Faulty clutch oil circuit
• No.2 linear solenoid valve malfunction
• Faulty PCM
• Gearshift function does
not work (while driving)
• Engine does not
operate
12-52 12-87
64-2 (64)
No.2 clutch oil pressure high (Prevention of
motorcycle creeps)
• No.2 clutch EOP sensor malfunction
• Faulty clutch oil circuit
• No.2 linear solenoid valve malfunction
• Faulty PCM
• Engine does not
operate
65-1 (65)
Front and rear wheel speed signal malfunction
• Front wheel speed sensor or its circuit malfunction
• VS sensor or its circuit malfunction
• Faulty ABS modulator
• Faulty PCM
• Gearshift function does
not work
12-53 12-88
66-1 (66)
VS sensor no signal
• VS sensor or its circuit malfunction
• Loose or poor contact of the VS sensor connector
• Electromagnetic interference at VS sensor
• Faulty PCM
• Gearshift function does
not work
12-54 12-89
67-1 (67)
Front wheel speed sensor no signal
• Front wheel speed sensor or its circuit malfunction
• Loose or poor contact of the front wheel speed
sensor connector
• Electromagnetic interference at front wheel speed
sensor
• Faulty ABS modulator
• Faulty pulser ring
• Faulty PCM
• Gearshift function does
not work
12-55 12-90
68-1 (68)
No.1 clutch operation malfunction (clutch slips)
• VS sensor or its circuit malfunction
• Faulty No.1 clutch
• Faulty PCM
• Gearshift function does
not work
12-56 12-91
69-1 (69)
No.2 clutch operation malfunction (clutch slips)
• VS sensor or its circuit malfunction
• Faulty No.2 clutch
• Faulty PCM
• Gearshift function does
not work
12-57 12-92
71-1 (71)
Inner mainshaft / countershaft speed ratio failure
• VS sensor or its circuit malfunction
• Inner mainshaft sensor or its circuit malfunction
• Faulty PCM
• Gearshift function does
not work
12-57 12-92
72-1 (72)
Outer mainshaft / countershaft speed ratio failure
• VS sensor or its circuit malfunction
• Outer mainshaft sensor or its circuit malfunction
• Faulty PCM
• Gearshift function does
not work
84-1 (84)
CPU in the PCM malfunction
• Faulty PCM
• Gearshift system stops
12-58 12-93
1-1 (1)
Shift pedal angle sensor (Optional) malfunction
• Shift pedal angle sensor or its circuit malfunction
• DCT shift pedal (Optional) mechanism
malfunction
• Loose or poor contact of the shift pedal angle
sensor connector
• Faulty PCM
• DCT shift pedal
(Optional) function
does not work
12-58 12-93
DTC
("–" blinks)
Function Failure
Symptom/Fail-safe
function
Refer
to
DTC
Re
fer
to
"–"

Honda NC700 2012 Specifications

General

Engine Type	670cc liquid-cooled parallel-twin
Bore x Stroke	73.0mm x 80.0mm
Compression Ratio	10.7:1
Front Brake	Single 320mm disc with two-piston caliper
Rear Brake	Single 240mm disc with single-piston caliper
Fuel Capacity	3.7 gallons
Fuel System	PGM-FI
Transmission	6-speed
Front Suspension	41mm telescopic fork
Rear Suspension	Pro-Link single shock
Front Tire	120/70-17
Rear Tire	160/60-17
Wheelbase	60.6 inches
Curb Weight	472 pounds