Honda NC700 2012 User Manual

12-114
dummyheaddummyhead
DUAL CLUTCH TRANSMISSION (DCT) (NC700XD/SD)
Hold the shift drum stopper arm [1] with a screwdriver
and install the shift drum center [2] by aligning the
groove [3] with the dowel pin [4].
Apply locking agent to the threads of the shift drum
center bolt [1] (page 12-4).
Install the shift drum center bolt and tighten it.
Install the stopper arm side collar [2] and guide plate
distance collar [3].
Install the plunger springs [1], plungers [2] and ratchet
pawls [3] into the drum shifter [4] and set them in the
drum shifter guide plate [5].
Install the drum shifter guide plate/drum shifter
assembly [1].
Apply locking agent to the threads of the guide plate
bolts [2] (page 12-4).
Install the guide plate bolts and tighten them.
Install the drum shifter collar [3] onto the drum shifter.
[4][3]
[2] [1]
TORQUE:23 N·m (2.3 kgf·m, 17 lbf·ft)
[2][1]
[3]
[3]
[4][5]
[2] [1]
TORQUE:12 N·m (1.2 kgf·m, 9 lbf·ft)
[3][1]
[2]

Honda NC700 2012 Specifications

General

Engine Type	670cc liquid-cooled parallel-twin
Bore x Stroke	73.0mm x 80.0mm
Compression Ratio	10.7:1
Front Brake	Single 320mm disc with two-piston caliper
Rear Brake	Single 240mm disc with single-piston caliper
Fuel Capacity	3.7 gallons
Fuel System	PGM-FI
Transmission	6-speed
Front Suspension	41mm telescopic fork
Rear Suspension	Pro-Link single shock
Front Tire	120/70-17
Rear Tire	160/60-17
Wheelbase	60.6 inches
Curb Weight	472 pounds