Honda NC700 2012 User Manual

13-12
dummyheaddummyhead
ALTERNATOR/STARTER CLUTCH
Apply engine oil to the starter one-way clutch [1] sliding
surface.
Install the starter one-way clutch to the starter clutch
outer [2].
Install the starter clutch assembly [1].
Hold the flywheel [1] using the special tool.
Apply locking agent to the starter clutch socket bolt
threads (page 13-4).
Install and tighten the starter clutch socket bolt [3] to the
specified torque.
Install the starter driven gear [1] into the starter clutch
outer while turning the starter driven gear
counterclockwise.
Recheck the one-way clutch operation (page 13-8).
Install the flywheel (page 13-9).
[2]
[1]
[1]
TOOL:
Flywheel holder [2] 07725-0040001
TORQUE:30 N·m (3.1 kgf·m, 22 lbf·ft)
[1] [2]
[3]
[1]

Honda NC700 2012 Specifications

General

Engine Type	670cc liquid-cooled parallel-twin
Bore x Stroke	73.0mm x 80.0mm
Compression Ratio	10.7:1
Front Brake	Single 320mm disc with two-piston caliper
Rear Brake	Single 240mm disc with single-piston caliper
Fuel Capacity	3.7 gallons
Fuel System	PGM-FI
Transmission	6-speed
Front Suspension	41mm telescopic fork
Rear Suspension	Pro-Link single shock
Front Tire	120/70-17
Rear Tire	160/60-17
Wheelbase	60.6 inches
Curb Weight	472 pounds