Interface Name
Set the name of the interface whose traffic statistics will be collected and
monitored.
Sample Item:
Interval Set the sampling interval.
Sample Type
Set the sampling type:
•
Absolute—Absolute sampling, namely, to obtain the value of the variable
when the sampling time is reached.
•
Delta—Delta sampling, namely, to obtain the variation value of the
variable during the sampling interval when the sampling time is reached.
Owner: Set the owner of the alarm entry.
Alarm:
Create Default Event
Select whether to create a default event.
Description of the default event is default event, the action is log-and-trap,
and the owner is default owner.
If there is no event, you can select to create the default event. And when the
value of the alarm variable is higher than the alarm rising threshold or lower
than the alarm falling threshold, the system will adopt the default action
log-and-trap.
Rising Threshold Set the alarm rising threshold.
Rising Event
Set the action that the system will take when the value of the alarm variable
is higher than the alarm rising threshold.
If the Create Default Event box is selected, this option is not configurable.
Falling Threshold Set the alarm falling threshold.
Falling Event
Set the action that the system will take when the value of the alarm variable
is lower than the alarm falling threshold.
If the Create Default Event box is selected, this option is not configurable.
Displaying RMON statistics
1. Select Device > RMON from the navigation tree.
The page in Figure 86 appears.
2. Click the icon for the statistics entry of an interface.
To Next Page
Loading...
Need help?
General