60
Displaying the electronic label
You can view information about the device electronic label, which is also known as the permanent
configuration data or archive information. The information is written into the storage medium of a device
or a card during the debugging and testing processes, and includes card name, product bar code, MAC
address, debugging and testing dates, and vendor name.
To view information about the electronic label:
1. Select Device > Device Maintenance from the navigation tree.
2. Click the Electronic Label tab.
The page for electronic label information appears.
Figure 45 Electronic label
Displaying diagnostic information
Each functional module has its own running information, and generally, you can view the output
information for each module one by one. To receive as much information as possible in one operation
during daily maintenance or when system failure occurs, the diagnostic information module allows you
to save the running statistics of multiple functional modules to a file named default.diag, through which
you can locate problems faster.
IMPORTANT:
The generation of the diagnostic file takes a period of time. During this process, do not perform any
operation on the Web page.
To open or save a diagnostic information file:
1. Select Device > Device Maintenance from the navigation tree.
2. Click the Diagnostic Information tab.
The diagnostic information page appears.
Figure 46 Diagnostic information
To Next Page
Loading...
Need help?
General