To Next Page

To Previous Page

510

Item Descri

tion

Remark

IP Precedence

Configure the action of marking IP precedence for packets.

Select the IP Precedence box and then select the IP precedence

value to be marked for packets in the following list. Select Not Set to

cancel the action of marking IP precedence.

Dot1p

Configure the action of marking 802.1p priority for packets.

Select the Dot1p box and then select the 802.1p priority value to be

marked for packets in the following list. Select Not Set to cancel the

action of marking 802.1p priority.

Local Precedence

Configure the action of marking local precedence for packets.

Select the Local Precedence box and then select the local

precedence value to be marked for packets in the following list.

Select Not Set to cancel the action of marking local precedence.

DSCP

Configure the action of marking DSCP value for packets.

Select the DSCP box and then select the DSCP value to be marked

for packets in the following list. Select Not Set to cancel the action

of marking DSCP value.

Filter

Configure the packet filtering action.

After selecting the Filter box, select one item in the following list:

• Permit—Forwards the packet.

• Deny—Drops the packet.

• Not Set—Cancels the packet filtering action.

Adding a policy

1. Select QoS > QoS Policy from the navigation tree.

2. Click the Add tab to enter the page for adding a policy, as shown in Figure 487.

Figure 487 Adding a poli

3. Add a policy as described in Table 150.

HP 1910 User Manual

Other manuals for HP 1910