344
Figure 312 IPv6 ping operation result
Traceroute operation
Before performing a traceroute operation, perform the following tasks:
• Enable sending of ICMP timeout packets by executing the ip ttl-expires enable command on
intermediate devices.
• Enable sending of ICMP destination unreachable packets by executing the ip unreachables enable
command on the destination device.
IPv4 traceroute operation
1. From the navigation tree, select Network > Diagnostic Tools.
2. Click the IPv4 Traceroute tab.
The IPv4 traceroute configuration page appears.
Figure 313 IPv4 traceroute configuration page
To Next Page
Loading...
Need help?
General