HP 1910 User Manual

296
Field Descri
p
tion
Group Address IPv6 multicast group address.
Router Ports All router ports.
Member Ports All member ports.
MLD snooping configuration example
Network requirements
As shown in Figure 261, MLDv1 runs on Router A and MLDv1 snooping runs on Switch A. Router A acts
as the MLD querier.
Perform the configuration so that Host A can receive the IPv6 multicast packets destined for the IPv6
multicast group FF1E::101, and Switch A drops the unknown IPv6 multicast packets rather than flooding
them in the VLAN.
Figure 261 Network diagram
Configuration procedure
Configuring Router A
Enable IPv6 multicast routing, assign IPv6 address to each interface, enable IPv6 PIM-DM on each
interface, and enable MLD on Ethernet 1/1. (Details not shown.)
Configuring Switch A
1. Create VLAN 100:
a. Select Network > VLAN from the navigation tree.
b. Click the Create tab.
c. Enter 100 as the VLAN ID.
d. Click Apply.

HP 1910 Specifications

General

Brand	HP
Model	1910
Category	Switch
Language	English