To Next Page

To Previous Page

# Create VLAN-interface 1 and assign 192.168.1.2 to the interface, and specify 192.168.1.1 as the default

gateway.

<Sysname> ipsetup ip-address 192.168.1.2 24 default-gateway 192.168.1.1

ipsetup ipv6

Syntax

ipsetup ipv6 { auto | address { ipv6-address prefix-length | ipv6-address/prefix-length }

[ default-gateway ipv6-address ] }

Parameters

auto: Enables the stateless address autoconfiguration function. VLAN-interface 1 can automatically

generate a global unicast address and link local address.

address: Enables manual configuration of a global unicast IPv6 address for VLAN-interface 1.

ipv6-address: Specifies an IPv6 address.

prefix-length: Prefix length in the range of 1 to 128.

default-gateway ipv6-address: Specifies the IPv6 address of the default gateway. If you specify this

option, the command not only assigns an IPv6 address to the interface, but also specifies a default route

for the device.

Description

Use ipsetup ipv6 auto to enable the stateless address autoconfiguration function so a global unicast

address and link local address can be automatically generated.

Use ipsetup ipv6 address { ipv6-address prefix-length | ipv6-address/prefix-length } [ default-gateway

ipv6-address ] to manually assign an IPv6 address to VLAN-interface 1.

Examples

# Create VLAN-interface 1 and enable VLAN-interface 1 to automatically generate a global unicast IPv6

address and link local address.

<Sysname> ipsetup ipv6 auto

# Create VLAN-interface 1 and assign 2001::2 to the interface, with the prefix length 64, and specify

2001::1 as the default gateway.

<Sysname> ipsetup ipv6 address 2001::2 64 default-gateway 2001::1

password

Syntax

password

Parameters

None

Description

Use password to modify the login password of a user.

Examples

# Modify the login password of user admin.

<Sysname> password

HP 1910 User Manual

Other manuals for HP 1910