To Next Page

To Previous Page

IP Method: Manual

IP address: 10.153.96.86

Subnet mask: 255.255.255.0

Default gateway:

IPv6 Method: Manual

IPv6 link-local address: FE80::2E0:FCFF:FE00:3621

IPv6 subnet mask length: 10

IPv6 global address: 2001::1

IPv6 subnet mask length: 64

IPv6 default gateway: 2001::2

Current boot app is: flash:/1910-cmw520-f1510.bin

Next main boot app is: flash:/1910-cmw520-f1510.bin

Next backup boot app is: NULL

HP Comware Platform Software

Comware Software, Version 5.20,

HP 1910-8G-PoE+ (65W) Switch uptime is 0 week, 0 day, 2 hours, 1 minute

HP 1910-8G-PoE+ (65W) Switch

128M bytes DRAM

128M bytes Nand Flash Memory

Config Register points to Nand Flash

Hardware Version is REV.A

CPLD Version is 001

Bootrom Version is 156

[SubSlot 0] 8GE+1SFP+POE Hardware Version is REV.A

telnet

Syntax

telnet remote-host [ service-port ] [ source { interface interface-type interface-number | ip ip-address } ]

Parameters

remote-host: IPv4 address or host name of a remote host, a case insensitive string of 1 to 20 characters.

service-port: TCP port number of the Telnet service on the remote host. It is in the range of 0 to 65535.

The default is 23.

source: Specifies the source interface or source IPv4 address of Telnet packets.

interface interface-type interface-number: Specifies the source interface by its type and number. The

source IPv4 address of the Telnet packets that are sent is the IPv4 address of the specified source interface.

interface-type interface-number represents the interface type and number.

ip ip-address: Specifies the source IPv4 address of Telnet packets.

Description

Use telnet to telnet to a remote host.

HP 1910 User Manual

Other manuals for HP 1910