HP 1910 User Manual

479
Figure 462 Adding a time range
3. Configure a time range as described in Table 131.
4. Click Apply.
Table 131 Configuration items
Item Descri
p
tion
Time Range Name Set the name for the time range.
Periodic
Time Range
Start Time Set the start time of the periodic time range.
You can define both a
periodic time range and
an absolute time range
to add a compound time
range. This compound
time range recurs on the
day or days of the week
only within the specified
period.
End Time
Set the end time of the periodic time range. The end
time must be greater than the start time.
Sun, Mon,
Tue, Wed,
Thu, Fri,
and Sat.
Select the day or days of the week on which the
periodic time range is valid. You can select any
combination of the days of the week.
Absolute
Time Range
From
Set the start time and date of the absolute time range.
The time of the day is in the hh:mm format (24-hour
clock), and the date is in the MM/DD/YYYY format.
To
Set the end time and date of the absolute time range.
The time of the day is in the hh:mm format (24-hour
clock), and the date is in the MM/DD/YYYY format.
The end time must be greater than the start time.
Adding an IPv4 ACL
1. Select QoS > ACL IPv4 from the navigation tree.
2. Click the Create tab.

HP 1910 Specifications

General

Brand	HP
Model	1910
Category	Switch
Language	English