Chassis ID The local chassis ID depending on the chassis type defined.
System capabilities
supported
The primary network function advertised by the local device:
• Repeater.
• Bridge.
• Router.
System capabilities
enabled
The enabled network function advertised by the local device:
• Repeater.
• Bridge.
• Router.
Device class
The device class advertised by the local device:
• Connectivity device—An intermediate device that provide network
connectivity.
• Class I—a generic endpoint device. All endpoints that require the discovery
service of LLDP belong to this category.
• Class II—A media endpoint device. The class II endpoint devices support
the media stream capabilities in addition to the capabilities of generic
endpoint devices.
• Class III—A communication endpoint device. The class III endpoint devices
directly support end users of the IP communication system. Providing all
capabilities of generic and media endpoint devices, Class III endpoint
devices are used directly by end users.
Displaying LLDP information received from LLDP
neighbors
1. Select Network > LLDP from the navigation tree.
2. Click the Neighbor Summary tab to display the global LLDP neighbor information, as shown
in Figure 213.
To Next Page
Loading...
Need help?
General