HP 1910 User Manual

7
Figure 6 Login page of the Web interface
Creating an admin user
1. Select Device > Users from the navigation tree.
2. Click the Create tab.
Figure 7 Creating an admin user
3. Set a username and password. Select Management from the access level list. Select at least one
service type.
4. Click Apply.
5. Click Save in the upper right corner of the page and click OK.
6. Click Logout in the upper right corner of the page.
NOTE:
Set a password with high complexity. Make sure you remember the username and password.

HP 1910 Specifications

General

Brand	HP
Model	1910
Category	Switch
Language	English