HP 1910 User Manual

73
Figure 58 Saving the configuration
To save the configuration in common mode:
1. Select Device > Configuration from the navigation tree.
2. Click the Save tab.
3. Click Save Current Settings.
Resetting the configuration
Resetting the configuration restores the system to the factory defaults, deletes the current configuration file,
and reboots the device.
To reset the configuration:
1. Select Device > Configuration from the navigation tree.
2. Click the Initialize tab.
3. Click Restore Factory-Default Settings.
Figure 59 Resetting the configuration

HP 1910 Specifications

General

Brand	HP
Model	1910
Category	Switch
Language	English