38
Figure 25 System parameter configuration page
2. Configure the parameters as described in Table 3.
Table 3 Configuration items
Item Descri
Sysname
Specify the system name.
The system name appears at the top of the navigation tree.
You can also set the system name in the System Name page you enter by selecting
Device > Basic. For more information, see "Configuring basic device settings"
Syslocation
Specify the physical location of the system.
You can also set the physical location in the setup page you enter by selecting Device >
SNMP. For more information, see "Configuring SNMP."
Syscontact
Set the contact information for users to get in touch with the device vendor for help.
You can also set the contact information in the setup page you enter by selecting
Device > SNMP. For more information, see "Configuring SNMP."
Configuring management IP address
CAUTION:
Modifying the management IP address used for the current login will terminate the connection to the
device. Use the new management IP address to re-log in to the system.
To Next Page
Loading...
Need help?
General