Remarks
2. Adding an IPv4 ACL
Required.
Add an IPv4 ACL. The category of the added ACL
depends on the ACL number that you specify.
3. Configuring a rule for a basic IPv4 ACL
Required.
Complete one of the foll
owing tasks according to the
ACL category.
4. Configuring a rule for an advanced IPv4 ACL
5. Configuring a rule for an Ethernet frame header
ACL
Recommended IPv6 ACL configuration procedure
Ste
Remarks
1. Configuring a time range
Optional.
Add a time range. A rule referencing a time range
takes effect only during the specified time range.
2. Adding an IPv6 ACL
Required.
Add an IPv6 ACL. The category of the added IPv6 ACL
depends on the ACL number that you specify.
3. Configuring a rule for a basic IPv6 ACL
Required.
Complete one of the tasks according to the ACL
category.
4. Configuring a rule for an advanced IPv6 ACL
Configuring a time range
1. Select QoS > Time Range from the navigation tree.
2. Click the Create tab.
To Next Page
Loading...
Need help?
General