2H0/2HZ
1-3-81
U984
Checking the developing unit number
Description
Displays the developing unit number.
Purpose
To check the developing unit number.
Method
Press the start key. The number is displayed.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
U985
Displaying the developing unit history
Description
Displays the past record of machine number and the developing counter.
Purpose
To check the count value machine number and the developing counter.
Method
Press the start key. Past record of 5 cases is displayed.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
U989
HDD scandisk
Description
Restores data in the hard disk by scanning the disk.
Purpose
If power is turned off while accessing to the hard disk is performed, the control information in the hard disk
drive may be damaged. Use this mode to restore the data.
Method
1. Press the start key.
2. Press [EXECUTE] on the touch panel.
3. Press the start key.
4. Turn the main power switch off and on. The hard disk is scanned.
5. When the memory indicator is turned off, turn the main power switch off and on.
U990
Checking/clearing the time for the exposure lamp to light
Description
Displays, clears or changes the accumulated time for the exposure lamp to light.
Purpose
To check duration of use of the exposure lamp. Also to clear the accumulated time for the lamp after replace-
ment.
Method
1. Press the start key.
The accumulated time of illumination for the exposure lamp is displayed in minutes.
2. Press the start key. The accumulated time is cleared.
Setting
1. Enter a accumulated time using the +/- or numeric keys.
2. Press the start key. The time is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Maintenance
item No.
Description
Display Description
MACHINE No.1 to 5 Past record of machine number
COUNT 1 to 5 Past record of developing counter
To Next Page
Loading...
Need help?
General
