2H0/2HZ
1-3-61
U328
Side ejection setting
Description
Sets whether to eject to the side of the machine when an optional curl eliminator is installed.
Purpose
Set according to the preference of the user.
Setting
1. Press the start key.
2. Select ON or OFF.
Initial setting: OFF
3. Press the start key. The setting is set.
4. Turn the main power switch off and on.
U332
Setting the size conversion factor
Description
Sets the coefficient of nonstandard sizes in relation to the A4/Letter size. The coefficient set here is used to
convert the black ratio in relation to the A4/Letter size and to display the result in user simulation.
Purpose
To set the coefficient for converting the black ratio for nonstandard sizes in relation to the A4/Letter size.
Setting
1. Press the start key.
2. Change the setting using the +/- keys.
3. Press the start key. The setting is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
U339
Setting the drum heater ON/OFF
Description
Turns the drum heater on or off during sleep mode.
Purpose
Set according to the preference of the user.
Setting
1. Press the start key.
2. Change the setting using the +/- or numeric keys.
*: The drum heater is off at sleep mode when the value is 0.
The drum heater is on at sleep mode when the value is between 1 and 4.
3. Press the start key. The setting is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Maintenance
item No.
Description
Display Description
ON To eject to the side of the machine
OFF Not to eject to the side of the machine
Description Setting range Initial setting
Size parameter 0.1 to 3.0 1.0
Display Description Setting range Initial setting
MODE Setting the drum heater ON/OFF 0 to 4* 0
To Next Page
Loading...
Need help?
General
