Kyocera KM-3060 Service Manual

2H0/2HZ
1-3-47
U157
Checking/clearing the developing drive time
Description
Displays the developing drive time for checking, or clearing a figure, which is used as a reference when cor-
recting the toner control.
Purpose
To check the developing drive time after replacing the developing unit.
Method
Press the start key. The developing drive time is displayed in minutes.
Clearing
1. Press the clear key.
2. Press the start key. The time is cleared.
Setting
1. Enter a drive time (in minutes) using the +/- or numeric keys.
2. Press the start key. The time is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
U158
Checking the developing count
Description
Displays the developing count for checking.
Purpose
To check the developing count after replacing the developing unit.
Method
Press the start key. The developing counter count is displayed.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
U161
Setting the fuser control temperature
Description
Changes the fuser control temperature.
Purpose
Normally no change is necessary. However, can be used to prevent curling or creasing of paper, or solve a
fuser problem on thick paper.
Method
1. Press the start key.
2. Select the item to be set.
3. Change the setting using the +/- or numeric keys.
4. Press the start key. The value is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Maintenance
item No.
Description
Display Description Setting range Initial setting
DRIVE START TEMP Driving start temperature when
warm-up starts
0 to 255 (
°C)
110
READY CONTROL T Fuser center control temperature for
displaying [Ready for copying.]
0 to 255 (°C)
165
READY CONTROL T2 Fuser edge control temperature for
displaying [Ready for copying.]
0 to 255 (
°C)
155
PRINT CONTROL T Fuser center control temperature
during printing
0 to 255 (
°C)
165
READY DISP TIME Time of period from driving until
Ready is displayed
0 to 255 (s) 0

Kyocera KM-3060 Specifications

General

Brand	Kyocera
Model	KM-3060
Category	All in One Printer
Language	English