2H0/2HZ
1-3-45
U135
Checking toner motor operation
Description
Turns the toner feed motor and toner feed clutch on.
Purpose
To check the operation of the toner feed motor or toner feed clutch. Settings may also be modified where
mobility in toner is inferior or when printing materials of very high density. Normally no change is necessary
from the initial setting.
Method
1. Press the start key.
2. Select the item.
Method
1. Select [TONER CARRY] or [TONER SUPPLY].
2. Press the start key. The operation starts.
3. To stop operation, press the stop key.
Setting: Low toner mobility
1. Select [CARRY ON TIME].
2. Increasing the setting value using the + key.
3. Press the start key. The value is set.
Setting: Printing very high density materials
1. Select [SUPPLY ON TIME].
2. Increasing the setting value using the + key.
3. Press the start key. The value is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Maintenance
item No.
Description
Display Description Setting
range
Initial
setting
TONER CARRY Toner feed motor (TFM) - -
TONER SUPPLY Toner feed clutch (TNFCL) - -
CARRY ON TIME Toner feed motor drive on time 0 to 255 100
SUPPLY ON TIME Toner feed clutch on time 0 to 255 30
SUPPLY OFF TIME Toner feed clutch off time 0 to 255 100
To Next Page
Loading...
Need help?
General
