2H0/2HZ
1-3-12
U000
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
U001
Exiting the maintenance mode
Description
Exits the maintenance mode and returns to the normal copy mode.
Purpose
To exit the maintenance mode.
Method
Press the start key. The normal copy mode is entered.
U002
Setting the factory default data
Description
Restores the machine conditions to the factory default settings.
Purpose
To move the mirror frame of the scanner to the position for transport (position in which the frame can be fixed).
Method
1. Press the start key.
2. Press [MODE1(ALL)] on the touch panel.
3. Press the start key.
The mirror frame of the scanner returns to the position for transport.
4. Turn the main power switch off and on.
An error code is displayed in case of an intialization error. Refer to the table of the error codes on P.1-3-15.
When ERROR 09 occurred, turn main power switch off then on, format the hard disk using maintenance
item U024, and execute initialization using maintenance item U002. For other errors occurred, turn main
power switch off then on, and execute initialization using maintenance item U002.
Maintenance
item No.
Description
No. Description Supplement
(29) Identification name for the security kit
(30) Security kit version
(31) Printed page counts Total/Copy/Printer/Fax
(32) Scanned page counts Total/Copy/Other
(33) Counts by paper sizes
(34) Fax kit information This item is printed only when the fax kit is installed.
(35) Destination information/Area informa-
tion
(36) Printable area setting
(37) Top offset for each bin MP tray/Cassette 2/Cassette 3/Cassette 4
(38) Left offset for each bin MP tray/Cassette 2/Cassette 3/Cassette 4
(39) Margin/Page length/Page width
settings
Top margin integer part/Top margin decimal part/
Left margin integer part/Left margin decimal part/
Page length integer part/Page length decimal part/
Page width integer part/Page width decimal part
(40) Panel lock information/USB information Panel lock
0: OFF/1: Partial lock/2: Full lock
USB
0: Not installed/1: Full speed/2: Hi speed
(41) RFID information
(42) Maintenance information
To Next Page
Loading...
Need help?
General
