2H0/2HZ
1-3-83
1-3-2 User management
In addition to a maintenance function for service, the machine is equipped with a management function which can be oper-
ated by users. In this user management mode, settings such as default settings can be changed.
(1) Using the user management mode
Press the system menu key.
Start
Select the item.
Press [Common Settings].
Make common settings (see P.1-3-84).
End
Press [Send Setting].
Resister the sending function for Quick Setup (see P.1-3-88).
Press [Document Box/Removable Memory].
Set the number of the documents of job box and register
the job box for Quick Setup (see P.1-3-88).
Press [Printer].
Make printer settings (see P.1-3-89).
Press [System].
Make network setup (see P.1-3-90).
Press [Report]
Output the report (see P.1-3-91).
Press [Copy].
Make copy settings (see P.1-3-87).
Press the cursor down key and [Adjustment/Maintenance].
Execute user adjustment and make machine settings
(see P.1-3-91).
Press the cursor down key and [Date/Timer].
Make date/timer settings (see P.1-3-92).
Press [Edit Destination].
Edit the destination (see P.1-3-93).
Press [User Login/Job Accounting].
Make user administration (see P.1-3-94).
Manage accounting the count (see P.1-3-95).
To Next Page
Loading...
Need help?
General
