2H0/2HZ
1-3-82
U991
Checking the scanner count
Description
Displays the scanner operation count.
Purpose
To check the status of use of the scanner.
Method
Press the start key.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
U993
Outputting a VTC-PG pattern
Description
Selects and outputs a VTC-PG pattern created in the machine.
Purpose
When performing respective image printing adjustments, used to check the machine status apart from that of
the scanner with a non-scanned output VTC-PG pattern.
Method
1. Press the start key.
2. Select the VTC-PG pattern to be output and press the start key.
3. Press the system menu key.
4. Press the start key. A VTC-PG pattern is output.
5. To return to the screen for selecting an item, press the system menu key.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Maintenance
item No.
Description
Display Description
COPY SCAN CNT Scanner operation count for copying
OTHERS SCAN CNT Scanner operation count except for copying
Display PG pattern to be output Purpose
PG1 Leading edge registration adjust-
ment
Center line adjustment
Margin adjustment
PG2 Lateral squareness adjustment
Magnification adjustment
PG3 Driving unevenness of drum
To Next Page
Loading...
Need help?
General
