M800S/M80/E80 Series Connection and Setup Manual
17 Setting the Hardware
383
IB-1501269-J
<Power supply unit>
MDS-E/EH-CV setting
17.1.2 Setting DIP Switch
As a standard setting, turn the all DIP switches OFF.
Rotary switch setting Setting items
0 Normal setting
1 ～ 3
Setting prohibited
4 External emergency stop setting
5 ～ F
Setting prohibited
CAUTION
An axis set unused is not included in the functional safety.
Power supply unit
(MDS-E/EH-CV)
The switches are OFF when facing bottom as illustrated.
M axis Setting unused axis
L axis Setting unused axis
S axis Setting unused axis
Unused axis can be set by turning the switches ON.
When there is unused axis for the drive unit,
set unused axis.
To Next Page
Loading...
Need help?
General
