Mitsubishi M80 series User Manual

M800S/M80/E80 Series Connection and Setup Manual
28 Setting the Handy Terminal
524
IB-1501269-J
It is necessary to customize the display part composition, the key input, the communication condition with NC, etc. to
connect the handy terminal (HG1T-SB12UH-MK1346-L*).
Create the customized data with "NC Designer HT" and download it to the handy terminal.
There are two methods to input customized data for the handy terminal.
(1) Connecting a personal computer and the handy terminal and inputting the data from "NC Designer HT"
(2) Connecting NC and the handy terminal and inputting the data from a SD card
28.1 Inputting the Data from a Personal Computer
Create a project data (*.p1t), which is handled as customized data, with the customized data creation tool "NC Designer
HT". Then download it to the handy terminal.
(1) Start the customized data creation tool "NC Designer HT" to create the project data (*.p1t).
(2) Connect a personal computer and the handy terminal via serial RS-232C.

Mitsubishi M80 series Specifications

General

Brand	Mitsubishi
Model	M80 series
Category	Control Unit
Language	English