M800S/M80/E80 Series Connection and Setup Manual
17 Setting the Hardware
389
IB-1501269-J
[Installation method]
(1) Check that the machine power is turned OFF. (If the power is not OFF, turn it OFF.)
(2) Confirm that the control unit LED, 7-segment display, etc., are all OFF.
(3) Open the front cover of the control unit.
(4) Fit the new battery into the battery holder.
(5) Insert the connector connected to the new battery into the BAT connector. Pay attention to the connector
orientation: do not insert backwards.
(6) Close the front cover of the control unit. At this time, confirm that the cover is closed by listening for the "click"
sound when the latch catches.
[M800S]
[M80/E80]
Front cover
Battery holder
Battery
BAT connector
Front cover
Battery holder
Battery
BAT connector
To Next Page
Loading...
Need help?
General
