Polycom CX5500 Administrator's Guide

Polycom CX5500 Unified Conference Station Administrator’s Guide 1.1.0
Polycom, Inc. 239
<call/>
The phone supports an optional per-registration feature that enables automatic call placement when the
phone is off-hook.
The phone supports a per-registration configuration that determines which events will cause the missed-
calls counter to increment.
You can enable/disable missed call tracking on a per-line basis.
The table Call Parameters defines per-site and per-phone configuration parameters. In the following
table, x is the registration number. For the CX5500 system, x=1-16.
Call Parameters
Parameter
Permitted Values
Default
call.advancedMissedCalls.addToReceivedList
0 or 1
0
Applies to calls on that are answered remotely. If 0, calls answered from the remote phone are not added to the
local receive call list. If 1, calls answered from the remote phone are added to the local receive call list.
call.advancedMissedCalls.enabled
0 or 1
1
If 1, improved missed call handling for shared lines is enabled (shared lines can correctly count missed calls). If
0, the old missed call handling is used for shared lines (shared lines may not correctly count missed calls).
call.advancedMissedCalls.reasonCodes
comma-separated list of
indexes
200
A comma separated list of reason code indexes that are interpreted to mean that a call should not be considered
as a missed call.
call.autoAnswer.micMute
0 or 1
1
If 0, the microphone is active immediately after a call is auto-answered. If 1, the microphone is initially muted
after a call is auto-answered.
call.autoAnswer.ringClass
see the list of ring classes in
<rt/>
ringAutoAnswer
The ring class to use when a call is to be automatically answered using the auto-answer feature. If set to a ring
class with a type other than answer or ring-answer, the setting will be overridden such that a ringtone of
visual (no ringer) applies.
call.autoOffHook.x.enabled
1
Enable or disable the feature
call.autoOffHook.x.contact
1
The contact address to where the call is placed
call.autoOffHook.x.protocol
1
The calling protocol to use
0 or 1
a SIP URL
SIP
0
Null
Null
If enabled is set to 0, no call is placed automatically when the phone goes off hook, and the other parameters
are ignored. If enabled is set to 1, a call is automatically placed to the contact using the calling protocol,
when the phone goes off hook.
The contact must be an ASCII-encoded string containing digits, either the user part of a SIP URL (for example,
6416), or a full SIP URL (for example, 6416@polycom.com).

Polycom CX5500 Specifications

General

Brand	Polycom
Model	CX5500
Category	Conference System
Language	English