Polycom CX5500 Unified Conference Station Administrator’s Guide 1.1.0
Polycom, Inc. 280
powerSaving.officeHours.duration.monday
powerSaving.officeHours.duration.tuesday
powerSaving.officeHours.duration.wednesday
powerSaving.officeHours.duration.thursday
powerSaving.officeHours.duration.friday
powerSaving.officeHours.duration.saturday
powerSaving.officeHours.duration.sunday
0 to 24
0 to 24
0 to 24
0 to 24
0 to 24
0 to 24
0 to 24
The duration of the day’s office hours.
powerSaving.officeHours.startHour.xxx
The starting hour for the day’s office hours, where xxx is one of monday, tuesday”, wednesday, thursday,
friday, saturday, and sunday (refer to powerSaving.officeHours.duration for an example.
powerSaving.userDetectionSensitivity.offHours
The sensitivity of the algorithm used to detect the presence of the phone's user during off hours. 10 is the most
sensitive. If set to 0, this feature is disabled.
The default value was chosen for good performance in a typical office environment and is biased for difficult
detection during off hours.
powerSaving.userDetectionSensitivity.officeHours
The sensitivity of the algorithm used to detect the presence of the phone's user during office hours. 10 is the
most sensitive. If set to 0, this feature is disabled.
The default value was chosen for good performance in a typical office environment and is biased for easy
detection during office hours.
<pres/>
The table Presence Parameters lists parameters you can configure for the presence feature. Note that
the parameter pres.reg is the line number used to send SUBSCRIBE. If this parameter is missing, the
phone will use the primary line to send SUBSCRIBE.
Presence Parameters
If 0, the MyStat and Buddies presence idle soft keys do not display. If 1, the soft keys display.
pres.idleTimeout.offHours.enabled
If 0, the off hours idle timeout feature is disabled. If 1, the feature is enabled.
pres.idleTimeout.offHours.period
The number of minutes to wait while the phone is idle during off hours before showing the Away presence status.
pres.idleTimeout.officeHours.enabled
If 0, the office hours idle timeout feature is disabled. If 1, the feature is enabled.