Polycom CX5500 Administrator's Guide

Polycom CX5500 Unified Conference Station Administrator’s Guide 1.1.0
Polycom, Inc. 33
Name
Possible Values
Quick Setup
Enabled, Disabled
If enabled, a QSetup soft key displays on the idle screen when you are in Lines View. When you tap this soft key,
a menu displays enabling you to configure the parameters required to access the provisioning server.
Note: The Quick Setup option is not available in the Updater.
Reset to Defaults
There are five ways to reset or clear phone features and settings, including settings from web or local override
files.
Base Profile
Generic, Lync
Use this to enable Lync-compatible phones to register with Lync Server. When set to Lync, the phone
automatically provisions with the minimum parameters required to register with Lync Server. You cannot modify
or customize the Base Profile. By default, the Base Profile is set to Generic.
Settings: Preventing Invalid Parameter Values
If you insert incorrect parameter values into the configuration file, the phone ignores the invalid
values and uses the previous configuration. Before you complete your configuration, make sure you
set values for these parameters.
Provisioning Server Menu
The configuration parameters shown in Provisioning Server Menu can be modified on the Provisioning
Server Menu.
Provisioning Server Menu
Name
Possible Values
DHCP Menu
See DHCP Menu. Note: This menu is disabled when the DHCP client is disabled.
Server Type
0=FTP, 1=TFTP, 2=HTTP, 3=HTTPS, 4=FTPS
The protocol that the phone uses to obtain configuration and phone application files from the provisioning server.
See Supported Provisioning Protocols.
Note: Active FTP is not supported for BootROM version 3.0 or later. Passive FTP is supported. Only implicit
FTPS is supported.

Polycom CX5500 Specifications

General

Brand	Polycom
Model	CX5500
Category	Conference System
Language	English