Polycom CX5500 Unified Conference Station Administrator’s Guide 1.1.0
Polycom, Inc. 83
● RR604Rxxxxxxx—Prepend 604 to all seven-digit numbers (replace nothing with 604)
For example, if a customer dials 4539400, 604 is added to the front of the number, so a call to
6044539400 is placed.
● xR60xR600Rxxxxxxx—Replace any 60x with 600 in the middle of the dialed number that matches
For example, if a customer dials 16092345678, a call is placed to 16002345678.
● 911xxx.T—A period (.) that matches an arbitrary number, including zero, of occurrences of the
preceding construct
For example:
911123 with waiting time to comply with T is a match
9111234 with waiting time to comply with T is a match
91112345 with waiting time to comply with T is a match
and the number can grow indefinitely given that pressing the next digit takes less than T.
● 0xxxS—All four digit numbers starting with a 0 are placed using the SIP protocol.
Take note of the following guidelines:
● The following letters are case sensitive: x, T, R, S, and H.
● You must use only *, #, +, or 0–9 between the second and third R.
● If a digit map does not comply, it is not included in the digit plan as a valid map. That is, no match
will be made.
● There is no limit to the number of R triplet sets in a digit map. However, a digit map that contains
less than a full number of triplet sets (for example, a total of 2 Rs or 5 Rs) is considered an invalid
digit map.
● If you use T in the left part of RRR’syntax, the digit map will not work. For example, R0TR322R will
not work.
Microphone Mute
When you activate microphone mute, the Mute keys glow red . The Mute keys can be configured to mute
audio and video when the CX5500 system is connected to a computer. No configuration changes can be
made to the microphone mute feature when using the CX5500 system as a standalone system not
connected to a computer.
Configure the Speed Dial Feature
You can link entries in your local contact directory to speed dial contacts on the phone. The speed dial
feature enables you to place calls quickly using dedicated line keys or from a speed dial menu. To set up
speed dial through the phone’s contact directory, see Use the Local Contact Directory. Speed dial
configuration is also explained briefly in Configure the Speed Dial Feature. In order to set up speed dial
contacts become familiar with parameters in the table Configure the Speed Dial Feature, which identifies
the directory XML file and the parameters you need to set up your speed dial contacts.
The speed dial index range is 1 to 9999.
To Next Page
Loading...
Need help?
General
