Polycom CX5500 Unified Conference Station Administrator’s Guide 1.1.0
Polycom, Inc. 311
If 0, the soft key x is disabled. If 1, the soft key is enabled.
The position on the phone screen for soft key x. For example, if the value is 3, the soft key will be displayed on
the screen in the third position from the left. Note: If softkey.x.precede is configured, this value is ignored. If
the insert location is greater than the number of soft keys, the key will be positioned last, after the other soft keys.
The text displayed on the soft key label. If Null, the label is determined as follows:
If the soft key performs an Enhanced Feature Key macro action, the label of the macro will be used.
If the soft key calls a speed dial, the label of the speed dial contact will be used.
If the soft key performs chained actions, the label of the first action is used.
If the soft key label is Null and none of the preceding criteria are matched, the label will be blank.
If 0, soft key x is positioned in the first empty space from the left. If 1, the soft key is displayed before (to the left
of) the first default soft key.
softkey.x.use.active
Display in the active call state
softkey.x.use.alerting
Display in the alerting state
softkey.x.use.dialtone
Display in the dial tone state
softkey.x.use.hold
Display in the hold state
softkey.x.use.idle
Display in the idle state
softkey.x.use.proceeding
Display in the proceeding state
softkey.x.use.setup
Display in the proceeding state
0 or 1
0 or 1
0 or 1
0 or 1
0 or 1
0 or 1
0 or 1
If 0, the soft key is not displayed when the phone is in the call state. If 1, the soft key is displayed when the
phone is in the call state.
<tcpIpApp/>
This parameter includes:
● <dhcp/>
● <dns/>
● <ice/>
● <sntp/>
To Next Page
Loading...
Need help?
General
