Polycom CX5500 Unified Conference Station Administrator’s Guide 1.1.0
Polycom, Inc. 260
divert.dnd.x.enabled
2
divert.dnd.x.contact
1
Divert calls when Do Not Disturb is enabled. If enabled is set to 1, calls will be diverted when DND is enabled
on registration x. Calls will be sent to the DND contact’s address if it is specified; otherwise calls will be sent to
the default contact specified by divert.x.contact.
If 0, the user cannot enable universal call forwarding (automatic forwarding for all calls on registration x). If 1, a
Forward soft key displays on the phone’s Home screen that you can use to enable universal call forwarding.
divert.noanswer.x.enabled
2
divert.noanswer.x.contact
1
divert.noanswer.x.timeout
1
contact address
positive integer
If no-answer call diversion is enabled, calls that are not answered after the number of seconds specified by
timeout will be sent to the no-answer contact. If the no-answer contact is set to Null, the call will be sent to
the default contact specified by divert.x.contact. If enabled is set to 0, calls will not be diverted if they are
not answered.
1
Change causes phone to restart or reboot.
2
Change causes phone to restart or reboot. If server-based call forwarding is enabled, this parameter is disabled.
<dns/>
The <dns/> parameters include:
● DNS-A
● DNS-NAPTR
● DNS-SRV
You can enter a maximum of 12 record entries for DNS-A, DNS-NAPTR, and DNS-SRV records.
DNS-A
Add up to 12 DNS-A record entries using the parameters in the table DNA-A Parameters. Specify the
address, name, and cache time interval for DNS-A record x, where x is from 1 to 12.
DNA-A Parameters
dotted-decimal IP version 4
address
To Next Page
Loading...
Need help?
General
