Polycom CX5500 Administrator's Guide

Polycom CX5500 Unified Conference Station Administrator’s Guide 1.1.0
Polycom, Inc. 322
Parameter
Permitted Values
Default
up.warningLevel
1
0 to 2
0
If 0, the phone’s warning icon and a pop-up message display on the phone for all warnings. If 1, the warning icon
and pop-up messages are only shown for critical warnings. Note: All warnings are listed in the Warnings menu
(navigate to Settings > Status > Diagnostics > Warnings on the phone).
up.welcomeSoundEnabled
1
0 or 1
1
If 0, the welcome sound is disabled. If 1, the welcome sound is enabled and played each time the phone reboots.
up.welcomeSoundOnWarmBootEnabled
1
0 or 1
0
If 0, the welcome sound is played when the phone powers up (cold boot), but not after it restarts or reboots
(warm boot). If 1, the welcome sound plays each time the phone powers up, reboots, or restarts.
1
Change causes phone to restart or reboot.
<upgrade/>
Use the parameters listed in the table Upgrade Server Parameters to specify the URL of a custom
download server and the Polycom UC Software download server for the phone to check when searching
for software upgrades.
Upgrade Server Parameters
Parameter
Permitted Values
Default
upgrade.custom.server.url
URL
Null
The URL of a custom download server.
upgrade.plcm.server.url
URL
http://downloads.polycom.com/voice/software/
The URL of the Polycom UC Software download server.
<video/>
The parameters in the table General Video Parameters are supported on the CX5500 system.
This parameter also includes:
● <camera/>
● <codecs/>

Polycom CX5500 Specifications

General

Brand	Polycom
Model	CX5500
Category	Conference System
Language	English