Renesas RX Series User Manual

R01UH0823EJ0100 Rev.1.00 Page 507 of 1823
Jul 31, 2019
RX23W Group 23. Multi-Function Timer Pulse Unit 2 (MTU2a)
Note: The initial output value of negative-phase waveform changes to an active level after the dead time has passed since counting
starts.
Note: The initial output value of negative-phase waveform changes to an active level after the dead time has passed since counting
starts.
Table 23.31 MTIOC4A Output Level Select Function
Bit 2 Function
OLS2P Initial Output Active Level
Compare Match Output
Up-Counting Down-Counting
0 High Low Low High
1 Low High High Low
Table 23.32 MTIOC4C Output Level Select Function
Bit 3 Function
OLS2N Initial Output Active Level
Compare Match Output
Up-Counting Down-Counting
0 High Low High Low
1 Low High Low High
Table 23.33 MTIOC4B Output Level Select Function
Bit 4 Function
OLS3P Initial Output Active Level
Compare Match Output
Up-Counting Down-Counting
0 High Low Low High
1 Low High High Low
Table 23.34 MTIOC4D Output Level Select Function
Bit 5 Function
OLS3N Initial Output Active Level
Compare Match Output
Up-Counting Down-Counting
0 High Low High Low
1 Low High Low High
Table 23.35 Setting of TOCR2.BF[1:0] Bits
Bit 7 Bit 6 Description
BF[1] BF[0] Complementary PWM Mode Reset-Synchronized PWM Mode
0 0 Does not transfer data from TOLBR to TOCR2. Does not transfer data from TOLBR to TOCR2.
0 1 Transfers data from TOLBR to TOCR2 at the crest of the
MTU4.TCNT count.
Transfers data from TOLBR to TOCR2 when
MTU4.TCNT or MTU3.TCNT is cleared.
1 0 Transfers data from TOLBR to TOCR2 at the trough of
the MTU4.TCNT count.
Setting prohibited
1 1 Transfers data from TOLBR to TOCR2 at the crest and
trough of the MTU4.TCNT count.
Setting prohibited

Renesas RX Series Specifications

General

Brand	Renesas
Model	RX Series
Category	Microcontrollers
Language	English