Copy Adjustments: Printing/Scanning
D017/D018/D019/D020 3-62 SM
Tray SP mode Specification
PFU tray 1), or LCT
4th paper feed (Optional
PFU tray 2)
SP1-002-4
By-pass feed SP1-002-5
Duplex, side 2 SP1-002-6
A: Leading Edge Registration
B: Side-to-side Registration
Blank Margin
 If the leading edge/side-to-side registration cannot be adjusted within the
specifications, adjust the leading/left side edge blank margin.
1. Check the trailing edge and right side edge blank margins, and adjust them using the
following SP modes.
SP mode Specification
Trailing edge SP2-101-2/3/4 3 ± 2 mm
Right edge SP2-101-6 2 +2.5/-1.5 mm