SP1xxx: Feed
SM 5-13 D017/D018/D019/D020
Service
Tables
5.2 SP1XXX: FEED
1001* Leading Edge Registration
1 Tray
2 By-pass
3 Duplex Side2
Adjusts the printing leading edge registration
from each paper feed station using the Trimming
Area Pattern (SP2902 Pattern No. 10).
[+9.0 to –9.0 / +0.0 / 0.1 mm/step]
Use the key to toggle between + and – before
entering the value.
The specification is 3 ± 2 mm.
See “Replacement and Adjustment - Copy
Adjustment” for details.
1002* Side-to-Side Registration
1 Tray 1
2 Tray 2
3
Tray 3 (Optional PFU
Tray 1, or LCT)
4
Tray 4 (Optional PFU
Tray 2)
5 By-pass
6 Duplex Side 2
Adjusts the printing side-to-side registration from
each paper feed station using the Trimming Area
Pattern (SP2902 Pattern No. 10).
[+9.0 to –9.0 / +0.0 / 0.1 mm/step]
Use the key to toggle between + and – before
entering the value. The specification is 2 ± 1.5
mm. See “Replacement and Adjustment - Copy
Adjustment” for details.
1003* Registration Buckle Adjustment
1 Tray 1
2 Tray 2/3/4 By-pass
Adjusts the paper feed clutch timing at
registration. The paper feed clutch timing
determines the amount of paper buckle at
registration. (A larger setting leads to more
buckling.)
[0 to 10 / 5 / 1 mm/step]
To Next Page
Loading...
Need help?
General