Paper Feed
D017/D018/D019/D020 6-50 SM
6.11 PAPER FEED
6.11.1 OVERVIEW
1. Paper Lift Sensor
2. Paper Height Sensor2
3. Paper Height Sensor1
4. Paper End Sensor
5. Paper Feed Roller
6. Upper Relay Sensor
7. Upper Relay Roller
8. Lower Relay Roller
9. Lower Relay Sensor
10. Friction Pad
11. Tray Heater (option)
12. Paper Size Sensor (Tray 2)
13. Paper Size Sensor (Tray 1)
There are two standard paper trays. Each tray holds 550 sheets.
 Each tray uses a friction pad (4) to separate paper so that only one sheet feeds at a
time.
 The paper feed roller (2) and shaft do not separate from the tray when the tray is pulled
out. This prevents paper from getting caught inside the machine when a tray is
removed.
 The two relay sensors are used to detect paper jams. The upper relay sensor (6)
detects jams for paper fed from either tray of the main machine. The lower sensor (8)
detects jams if paper is fed up from the optional paper feed unit or LCT.
To Next Page
Loading...
Need help?
General