Installation procedure
• When you install this option, turn off the power to the machine, and unplug the power plug from the
wall socket.
• If it is installed with the power on, it will result in an electric shock or a malfunction.
• Cannot be used together with “Internal Shift Tray SH3070” and “Side Tray Type M3”.
• For using this option together with “1 Bin Tray BN3110”, attach the bottom plate of this option at
the beginning, then install the “1 Bin Tray BN3110”, followed by installing this option.
1. Remove the orange tape and shipping retainers.
2. Remove the screw securing the unit ( x 1).
Internal Finisher SR3180
129
To Next Page
Loading...
Need help?
General
