3. Exit the User Tools mode.
Icon [1]
This icon is lit when there is temporary data to be overwritten,
and blinks during overwriting.
Icon [2]
This icon is lit when there is no temporary data to be
overwritten.
4. Check the display and make sure that the overwrite erase icon appears.
5. Check the overwrite erase icon.
The icon [1] is lit when there is temporary data to be overwritten, and blinks during overwriting.
The icon [2] is lit when there is no temporary data to be overwritten.
HDD Encryption
Before You Begin the Procedure
1. Make sure that the following settings (1) to (3) are not at the factory default settings.
(1) Supervisor login password
(2) Administrator login name
(3) Administrator login password
2. Installation
206
To Next Page
Loading...
Need help?
General
