SC No. Level Error Name/Error Condition/Major Cause/Solution
SC995-03 D
CPM setting error 3
Comparison of machine serial number (11 digits) and machine
identification code.
Details:
Unable to recognize machine identification code because the controller
was replaced incorrectly or is malfunctioning.
machine serial number (11 digits) or machine identification code does
not match.
Replace it with a specified controller.
SC995-04 D
CPM setting error 4
Comparison of machine serial number (11 digits) and machine
identification code.
machine serial number (11 digits) or machine identification code does
not match.
Return the parts to the original configuration, and then replace them
according to the manual.
SC900 (Controller)
SC No. Level Error Name/Error Condition/Major Cause/Solution
SC900-00 D
Electric counter error
The electric total counter value is out of specification.
Error is detected when increasing the total counter.
• Unexpected NV-RAM is attached.
• NV-RAM defective
• NV-RAM data corrupted.
• Data written to unexpected area because of external factor etc.
• The count requested by the SRM on receiving PRT is not completed.
Replace the NV-RAM.
Service Call 900-998
613
To Next Page
Loading...
Need help?
General
