• Automatic restart deals with cases when you accidentally unplugged the AC power cord or
unexpected power outages. By keeping the power flag ON, after the resumption of power, the
machine will start up automatically.
In rare cases, when you reconnect the AC power cord to a power outlet, the machine does not start
automatically. In this case, the machine has not failed. The cause is due to the timing of releasing the
residual charge. If you press the main power switch while the residual charge was already released, the
power ON flag will not be set. At this time, start the machine manually by pressing the main power
switch.
Shutdown Method
1. Press the main power switch [A] on the machine.
2. The shutdown message is displayed. Wait for 3 minutes for the machine to shut down.
• After the shutdown process, the main power is turned off automatically.
• Before removing and adjusting electrical boards, do the following procedure. Otherwise, the
board can be damaged by the residual charge inside the machine and must be replaced.
1. Take out the power cord after shutdown.
2. Press the power switch for a second to remove the residual charge inside the machine.
Forced Shutdown
In case normal shutdown does not complete for some reason, the machine has a forced shutdown
function.
4. Replacement and Adjustment
220
To Next Page
Loading...
Need help?
General
