Roche Diagnostics
B-44 Operator’s Manual · Version 3.1
5 Daily operation Cedex Bio System
Analyzing samples
Starting the run
a To start processing an order
1
Press the global action button.
The system checks whether there are enough cuvettes and whether all required
reagents are on the reagent disk.
If any of this is not the case, a screen is displayed informing you of what is
missing.
Order of processing When you first start processing orders, the order of the sample placed on the leftmost
position on the sample area is processed first. The others follow in sequence from left
to right. Once processing is in progress, the orders are processed according to
sequence in which they were defined.
Repeats and reruns of routine orders are performed before routine orders.
Monitoring the analysis progress
During operation, you should regularly check the following items:
o The status of the buttons on the Overview tab
o The Alarm Monitor LED
Checking the sample tube status
a To check the sample status
1
Press the Overview tab.
Interpreting the sample tube
buttons
A Sample tube buttons
B Information on tests that are associated
with defined orders
C Information on results that are associated
with defined orders
D Alarm Monitor LED
Figure B-12
Icon Meaning Possible action
1
The number in the button denotes
the position on the sample area.
n/a
A sample tube button with a wide
edge symbolizes a STAT order.
n/a
To Next Page
Loading...
Need help?
General
