Roche Cedex Bio System User Manual

Roche Diagnostics
B-78 Operator’s Manual · Version 3.1
5 Daily operation Cedex Bio System
Finishing the shift
Short guide
The following table provides an overview of the steps that make up the end of shift
process.
Step User action
1
Check for unfinished tasks. 1. Check for unfinished orders.
2. Check for nonvalidated results.
3. Check for results that were not transmitted.
2
Start the End Shift wizard. 1. On the Overview tab, press the End Shift but-
ton.
3
Perform data backup. 1. Press .
2. Insert the USB stick.
3. Press .
4. Select the directory.
5. Press .
6. Press to proceed to the next stage in the
End Shift wizard.
4
Export support data. 1. Press .
2. Insert the USB stick, if you have removed it.
3. Press .
4. Select the directory.
5. Press .
6. Remove the USB stick.
7. Press to proceed to the next stage in the
End Shift wizard.
5
Clean up the database. 1. Press .
2. Press to confirm the deletion.
3. Press to proceed to the next stage in the
End Shift wizard.
Table B-9 Steps for finishing the shift

Roche Cedex Bio System Specifications

General

Brand	Roche
Model	Cedex Bio System
Category	Measuring Instruments
Language	English