Roche Cedex Bio System User Manual

Roche Diagnostics
A-82 Operator’s Manual · Version 3.1
4Software Cedex Bio System
Key screens
Key screens
The main screen is divided into tabs. These tabs represent distinct work areas.
f The Overview tab is your main work area when performing the daily routine tasks.
o Use the Workplace to gain information on orders and the corresponding results.
You can also start the lot handling functions from this tab.
o Use the Utilities tab to perform tasks that are not normally part of the routine
analysis workflow. Typically, these would be administration and maintenance
tasks.
The following sections describe the key screens of these tabs and point out the main
tasks you can perform on them.
Overview tab
The Overview tab is your main work area when performing the daily routine tasks.
Show details about the order for this sample.
STAT Define STAT orders.
Order Define routine orders.
Tests Check the status of the currently installed tests.
Log off, (Log on) Log off or on the system.
If somebody is logged on, your user name is displayed, for example admin; if nobody
is logged on, Log on.
Prepare Perform the preliminary tasks at the beginning of a shift.
End Shift Perform the necessary tasks when ending the shift.
The screen representations shown in this chapter and throughout this manual are for illus-
trative purposes only. The screens do not necessarily show valid data.
A Tube icons
B Status of current order processing
C Buttons
Figure A-48 Overview tab
C
A
B

Roche Cedex Bio System Specifications

General

Brand	Roche
Model	Cedex Bio System
Category	Measuring Instruments
Language	English