Roche Diagnostics
Operator’s Manual · Version 3.1 B-135
Cedex Bio System 7 Configuration
Introduction
Introduction
The process for viewing and changing configuration and application values is the
same. The following procedures use the example of a calibration value.
Viewing values
a To view values
1
Choose Utilities > Applications > Laboratory Parameters.
2
Expand the list.
o Select a list item marked with .
o Press .
o Select a sublist item marked with .
o Press .
o Use the scrollbar, if required, to display the items you are interested in.
The definition items and their current values are displayed.
Changing values
If the change of a value results in one or several other values needing to be changed, a
wizard is started when you change the first value. You recognize a wizard by the
presence of the and buttons.
a To change a value
1
Choose Utilities > Applications > Laboratory Parameters.
2
Expand the list to display the items and their values.
It is the users’ sole responsibility to determine whether they activate the TRL Check fea-
ture, and if they do so to define the lower measuring range in accordance with the country
specific requirements. If the users activate the TRL Check feature, they are also responsi-
ble for validation of the ranges they define.
e
See Calculation definitions on page B-155 and Installing applications on page B-137.
To Next Page
Loading...
Need help?
General
