Roche Diagnostics
Operator’s Manual · Version 3.1 B-111
Cedex Bio System 6 Special operations
Importing data
Importing data
f Utilities > Import
You can import the following kinds of data:
o Application data (application definitions)
o Software (software updates)
o Database (as exported using Utilities > Export > Database)
o Certificates (digital records that ensure the authenticity of reagent barcodes)
o Extra wash cycle and mixing rule definitions
Importing applications
Importing an application consists of two steps:
1. Importing the data to the instrument by reading a barcode or a data file. This step
stores the data on the instrument.
2. Installing the application. This step activates the application on the instrument
and so makes it available for use.
a To import application data
1
Do one of the following:
o Choose Utilities > Applications > Laboratory Parameters, then continue
with step 2.
o Choose Utilities > Import > Application, then continue with step 4.
2
Press .
3
Press Import Application.
A screen is displayed, asking you to scan the barcode or to import the data from
the USB stick.
4
Do one of the following:
The system checks whether there is already an application on the system with
identical application code and short name.
If… Do this…
You intend to scan the barcode: 1. Scan the barcode from the barcode
sheet.
You intend to import from the USB stick: 1. Press .
2. Insert the USB stick.
3. Press .
4. Select the directory that contains the
application file.
You recognize the application pack-
ages by their file extension .tsb.
5. Press to confirm the selection.
To Next Page
Loading...
Need help?
General
