Roche Diagnostics
B-100 Operator’s Manual · Version 3.1
6 Special operations Cedex Bio System
Lot handling
a To gain a general overview of the currently defined reagent sets
1
Choose Utilities > Inventory.
The Bottle sets list is displayed. It contains all bottle sets that are defined on any
of the disks used on this Cedex Bio instrument, including sets that were removed
from the disk, as long as they were not empty or their expiration date has not
passed yet.
2
Select a set and press .
A dialog box is displayed that contains detailed set information.
3
Press .
A dialog box is displayed that contains set, calibration, and QC information.
4
Press to close the dialog boxes until the Utilities tab is displayed.
Viewing the lot details of fluids that were used
For sample, calibration, and QC results, you can check to which lot the used fluids
belong (reagents, calibrators, controls).
a To check context information of a result
1
Do one of the following:
A Number of tests left
B ID of reagent disk on which the set is
defined
CR indicates that the set was removed from
the disk.
Figure B-32
If Do this
You want to check the context information
of a sample result:
1. Choose Workplace > Result Overview.
2. Select a result.
3. Choose > .
You want to check the context information
of a QC result:
1. Choose Workplace > QC Status.
2. Select a result.
3. Choose > .
You want to check the context information
of a calibration result:
1. Choose Workplace > Calibrations.
2. Select a result.
3. Choose > .
To Next Page
Loading...
Need help?
General
